Tel : 86 769 33329791      Email : [email protected]

Dual (Double) Platform Taber Rotary Abraser

Home/Leather Testing Equipment/Dual (Double) Platform Taber Rotary Abraser
Dual (Double) Platform Taber Rotary Abraser2021-09-17T07:28:19+00:00

Project Description

Double head Taber Rotary Abraser

Double-station Taber Abrader China Supplier

Taber Rotary Abraser is a commonly used wear resistance testing machine intended to determine the abrasion performance of the different specimens like cloth, paper, paint, plywood, leather, floor tiles, glass, natural plastics, etc.

It is an indispensable tester for quality control, new product research & development and materials evaluation.

Compared with the ordinary Taber Abrasion Tester, the most prominent feature of this Taber-type abrasion tester is that it has two turntables and four pcs of abrading wheels. In other words, it can test two samples at the same time each time, which can significantly improve the testing efficiency in the laboratory.

The turntables are capable of revolving on a vertical axis at a constant speed. Two square or round flat specimens of specified area and thickness are installed on turntable platforms. The abrading arms can be raised to mount or examine the test pieces. After four abrading wheels are mounted on the horizontal axis of the corresponding positions at the end of the abrading arms, the weights of the specified weight and quantity should also be mounted on the outside of each abrading wheel to apply the specified force throughout the test if necessary. When the abrading arms are lowered onto the specimen surface, the abrasive wheels are actuated by the specimens in opposite directions. For every turntable, one abrasive wheel grinds the test piece outward toward the periphery, and the other wheel rubs the test piece inward toward the center. It is equipped with a vacuum cleaner to remove the residues during the test. Specimens are inspected at regular intervals for abrading state.


Test Standards

ASTM D3884, ASTM D1175, ASTM D1044, ASTM D4060, TAPPI T476, ISO 9352, ISO 5470-1, JIS K7204, JIS A1453, JIS K6902, JIS L1096, DIN 52347, DIN 53109, DIN 53754, DIN 53799, ISO 17076-1, EN 438-2, DIN 68861-2, ISO 4586-2, etc.

Technical Parameters

Model AT-L9001A
Abrading Wheel’s Dimension Outer dia.: 51.9 mm (Max.: 52 mm), Thickness: 12.7 mm
Center hole’s Diameter 6.35 mm
Rotating Speed 60 rpm / 72 rpm / adjustable
Distance Between the Inside Faces of Each Pair of Abrasive Wheels 52.4 mm
Additional Loads 250 g × 4 pcs

500 g × 4 pcs

750 g × 4 pcs

Counter 0 ~ 999,999 cycles
Dimension 90 cm × 70 cm × 42 cm
Weight About 36 kg
Power Supply 1∮, AC 220 V, 50Hz / AC 110V, 60 Hz
Standard Configurations Double-headed Taber Abraser  1 set

Vacuum machine  1 set

250 g Weight  4 pcs

500 g Weight  4 pcs

750 g Weight  4 pcs

Abrading wheel CS-10 or CS-17  4 pcs or Specified

S-11 Sandpaper  10 pcs

Paster  6 pcs

Power line  1 pc

Hex wrench  1 PC

Suggestion on selecting abrading wheels (For more, please check them in FAQ on “how to choose the right Taber abrading wheels” at the bottom of this page) For coatings: CS-10, CS-17

For Plastics: CS-17, H-18, H-22

For high-pressure decorative laminates: CS-32, CS-33

For textile fabrics: H-18, H-22

abrading wheels of Taber

Dual-station Taber Abraser Features

  1. Configured with dual stations to accommodate two pieces of the test sample at the same time.
  2. 2 stations can be operated and controlled separated.
  3. 2 digital displays are equipped to indicate the real-time parameters.
  4. The physical keys are used for users to set the various parameters quickly and conveniently.
  5. The rotating speed allows both 60 rpm and 72 rpm or being adjustable.
  6. A vacuum cleaner is attached to the testing machine together to remove the debris during the test.
  7. Three different weights: 250 g, 500 g, 750 g, are included in the standard accessories. We also can provide corresponding weights according to the needs of users.
  8. We assign various abrasive wheels and refacing sandpaper to clients based on the different test standards.


What Is the Taber Abrasion Test?2021-07-04T07:00:54+00:00

Taber abrasion test is a test method to evaluate the abrasion resistance of materials, which is to simulate whether the material can withstand repeated friction under set conditions. The test method is that a specimen rotating at a fixed speed is pressed against a pair of abrading wheels, and the specified load is applied to the specimen. When the turntable rotates, the abrasion wheel is driven to rub the specimen. The mass loss caused by abrasion is the difference in the mass of the specimen before and after the test. Taber abrasion test is one of many abrasion test methods. The word “Taber” comes from the name of the company that invented this machine.

What Are Applications of Taber Abrasion Tester?2021-07-04T07:13:58+00:00

Taber Abrasion Testing Machine can almost be called a versatile device. It is widely applicable to the determination of abrasion resistance of the leather, fabrics, textiles, coatings, paints, varnishes, carpets, ceramics, porcelain enamels, wood, furniture, paper, high-pressure decorative laminates, glass, rubber, plastic, luggage, anodized aluminum, deck and floor coverings, synthetic turf, etc.

Taber Type Abrasion Tester plays a vital role in evaluating the wear-resisting property of the materials and products. For some special purpose products in the industrial field, the ability of raw materials to resist wear is a crucial property that manufacturers have to focus on, as it directly impacts the quality of finished products. Taber abraser can determine this property within a short time in the laboratory to attain a relatively reliable result.

Amade is able to supply different types of Taber Abraser. If you are looking for a Taber abrasion tester for sale, please feel free to reach Amade for more details.

How to Choose the Right Taber Abrading Wheels?2021-07-03T12:32:06+00:00

We know that Taber Abraser is widely used and can meet dozens of different test standards. The products in each test standard are different, and different products are required to use different types of grinding wheels during the test. Faced with so many types of grinding wheels, how should we choose?

When we choose the grinding wheel, we must choose the corresponding grinding wheel according to the characteristics of the grinding wheel and the difference of the sample. Please refer to the grinding wheel models and corresponding sample types listed in the table below to help you select the correct grinding wheels.

Wheel Model Applications Characteristics
CS-10 Organic coatings, plastics, textiles, leather and paper products Resilient, mild-medium abrading
CS-10F Safety glazing materials and transparent plastics Resilient, mild abrading designed to operate under loads of 250 or 500 grams
CS-17 Anodized aluminum, powder coatings, ceramics, plastics and enamels Resilient, Compared to the CS-10 wheel, harsher abrasion, operated using loads of 500 or 1000 grams
H-10 Steel and ferrous alloys for resistance to abrasion

Test the effect of hardening and tempering treatment on steel and other ferrous materials

H-18 Rubber (non-tacky), certain woven textile fabrics, coated fabrics

Flexible plastic sheets

Non-resilient , medium coarse abrasive action
H-22 Rubber, linoleum, leather, deep pile fabrics and concrete (such as automobile floor coverings) Non-resilient, coarse abrasion
H-38 Woven and non-woven fabrics, operate with 250 or 500 gram loads Non-resilient, vitrified abrading wheel comprised of fine abrasive particles
CS-0, S32-rubber Wet tests such as determining the relative abrasion of dental pastes, cleaning powders, or similar compounds

Adhesive sandpaper strips can be adhered to the periphery of the CS-0 wheel to evaluate the abrasion resistance of high-pressure decorative laminates and other products.

Resilient, no abrasive particles, mild abrasive
S-42, S-33-sand paper strip


Vitreous and porcelain enamels, paints, metallic coatings, and furniture surfaces Resilient, Medium abrasion
CS5-Felt testing textile fabrics when the service wear requires one fibrous material to rub against another.

Designed to be tested with 250 or 500 gram loads

S35-tungsten carbide Resilient materials such as rubber, linoleum, and leather Non-resilient, very severe abrasion, sharp helical teeth, combine both a cutting and tearing action

taber abrading wheels

What If I Don’t Know How to Choose the Grinding Wheels?2021-07-03T12:32:52+00:00

Don’t worry. Please directly inform Amade Sales what product you will use this Taber Tester to test on or what standard you will follow in your test. Our sales specialists will include the right abrading wheels in the quotation for you.

Do I Need to Buy Additional Consumables?2021-07-04T07:19:32+00:00

After receiving your inquiry, we will analyze and confirm the type of consumables to be matched. The consumables are already included in our quotation, so you don’t need to buy additional consumables, including the vacuum cleaner, which is also a free gift together with the machine. You can purchase from AMADE with confidence. There are no hidden extra costs.

In the future, if your consumables are used up and you want to buy new consumables, you can contact AMADE to buy them at any time.

What Specimen Size Is Used for the Taber Abrasion Resistance Test?2021-07-03T16:21:59+00:00

Disk Area Requirements:

The size of the specimen is related to the material. For most hard-made specimens, the specimen size can be a square with a side length of 100 mm (4.0 inches). For soft specimens, the specimen should be round and use a sample holder. If a sample pad is used, the diameter of the sample should be 108 mm (4.25 inches). If the sample pad is not used, the diameter of the sample should be 135 mm (5.25 inches) so that the sample fixing ring can clamp the edge of the specimen.

If the specimen is smaller than the recommended size, you can put 2 to 3 samples on the specimen pad to meet the needs of the test. If the edges of the sample cannot butt or the thickness of the sample is different, the abrasion test results reflected on the edges will be different from the results of other parts of the sample.

Thickness requirements:

The standard thickness is 6.35 mm (0.25 inches). For samples with a thickness of more than 6.35 mm (0.25 inches) and less than 12.7 mm (0.5 inches), the S-21 riser nut needs to be adjusted. Thickness exceeding 12.7 mm (0.5 inches) requires the use of an abrasion bracket arm raising device.

Can I Get Another Combination of the Weights Rather Than 250g/500g/750g?2021-07-04T07:21:41+00:00

Of course. Our standard accessories include a pair of 250g weights, a pair of 500g weights and a pair of 750g weights. However, if your test does not use some of these weights, we can provide you with only one or two of them. For example, if you don’t need 250 and 500g weights, we can only configure 6 pcs of 500g weights for you, without extra cost.

No matter what your personalized requirements, please tell the AMADE salesperson directly, we will do our best to meet your requirements.

What Is the General Test Procedure for Taber Abraser?2021-07-03T12:38:41+00:00
  1. Check and ensure that the Taber abrasion testing machine and all necessary accessories, including vacuum cleaner, specimen, weights, abrading wheels, wrench, brush, etc., are in place.
  2. According to the specimen, please choose the right abrasive wheels, attach them to the pivoted arms, and tighten the knurled nuts to ensure that both are secured. Please note that there are resilient abrading wheels and vitrified abrading wheels. To achieve consistency of the test, the resilient wheels have to be refaced using a resurfacing disc(S-11) or sandpaper before every test and at intervals. For more details, refer to the specification in the standard cited. The vitrified abrading wheels don’t need this process.
  3. Weigh the specimen before being rubbed, and screw off bolts and take down the clamp ring from the specimen holder, then place the test specimen on the turntable in place (circular backing cardboard or a solid board equivalent to it is necessary to be padded beneath the specimen If the test piece is soft fabric), then screw up the bolts to fix the specimen.
  4. Lower the two grinding heads slowly and carefully until the wheels rest on the specimen, then check whether it needs to add loading weight based on different standards (weights of 250 g, 500 g & 750 g are available).
  5. Put down the ledge with vacuum pickup nozzles, adjust the position and vertical height above the surface of the test pieces according to the specification, and connect the vacuum machine to the Taber abrader, start the vacuum, and adjust the pressure to an appropriate value.
  6. Set the number of specimen revolutions and abrading speed, press the test button to start the machine.
  7. The machine will stop automatically once reaching the set number of cycles. You can brush the test piece and weigh it again to calculate the test result based on the specific method in the standard.

Please note: The above is a generic instruction for your reference. More test procedures in detail must follow the specific Taber abrasion test standards referenced.

What Are the Precautions for Using This Taber Machine?2021-07-04T07:27:12+00:00
  1. The machine must be placed on a level table before use.
  2. It is not allowed to move the machine during use.
  3. Select the corresponding power supply and voltage, do not use over-high voltage to avoid burning the device.
  4. When the instrument is abnormal, please contact our company for timely handling.
  5. Please pay attention to check the machine at regular intervals and add the proper amount of lubricating oil for some mechanical components If necessary.
  6. After each test, clean the machine and keep the machine clean.
  7. The control part must be wiped with a dry cloth, not a wet cloth.

If you want to learn more about the product, please feel free to contact AMADE Sales Staff.

What Types of Taber Machine Can Amade Provide?2021-07-04T07:37:19+00:00

AMADE can provide 3 different Taber type abrasion testers. They are Single Platform Taber Abrader, Dual Platform Taber Abraser and Taber Linear Abraser, please refer to the pictures below:

Taber Abrader
Single Platform Taber Abrader
Dual platform Taber Rotary Abraser
Dual Platform Taber Abraser
Taber Linear Abraser
Taber Linear Abraser
How To Place an Order With AMADE TECH?2021-07-04T07:27:56+00:00
  1. The ordering procedure is too simple. First, leave your inquiry directly in “Send an Inquiry” on this page or find the sales email in “Contact Us” page to contact AMADE’s sales department directly. Under normal circumstances, you will get a reply from Amade Salesperson within 12 hours. PLEASE NOTE: Kindly write your test object or test standard in the inquiry, which is very important. If you do not write it clearly, the sales staff will not know what abrading wheel and sandpaper to configure for you when quoting. Moreover, if you have other special requirements for transportation or other aspects, please try to tell us the details in your inquiry, so that we can provide accurate quotation and service for you.
  2. AMADE sales staff will make a complete quotation as soon as possible and send it to the mailbox left by you. This quotation will contain the product price, parameters, detailed introduction, payment terms, shipping terms, lead time, etc., information.
  3. After you and the salesperson agree on various conditions, the sales staff will make a PI for you to arrange the advance payment. When the advance payment is received, AMADE production department will be informed to start production. During the preparation of the goods, the sales staff will update the production progress in real-time to you. After production is completed within the specified delivery period, AMADE will arrange delivery immediately after receiving the balance payment. After you receive the goods, the after-sales personnel of AMADE will guide and help the use of the equipment and provide life-long technical support for the product.
When Can I Expect My Goods After Placing the Order?2021-07-03T13:17:32+00:00

The Delivery of the Taber Abrasion Tester is very fast. Goods will be shipped within 2 ~ 3 working days after receipt of payment. If you choose to transport by international express like DHL, FedEx, TNT, the transit time will be less than one week.

How to Pack the Machine and What’s in the Case?2021-07-03T13:19:59+00:00

How to Pack the Machine?

We use the special non-fumigation export wooden case to pack the products (refer to the right picture). The machine in the case is surrounded with foam to protect the machine from bumping and damage during transportation.

packaging of taber abraser
Taber abraser configurations

What Details Are Contained in the Case?

Take a single platform Taber abraser as an example, the items placed in the wooden box are as follows( Please refer to the left picture):
Taber Abraser  1 set
Vacuum cleaner  1 set
250 g Weight  2 pcs
500 g Weight  2 pcs
750 g Weight  2 pcs
Abrading wheel CS-10 or CS-17  1 pair or Specified
S-11 Sandpaper  5 pcs
Paster  3 pcs
Power line  1 pc
Hex wrench  1 pc

Can I Use the Machine Directly After I Receive It?2021-07-03T13:23:26+00:00

Yes, it is ready to use once you receive the goods.

Because before shipment, our technicians have completed the installation, debugging and calibration of the machine. When the user receives the goods, he/she only needs to plug in the power supply to start working in the laboratory. We will provide users with professional operating instructions to help them use our products. If users have any questions during use, they can contact us at any time. AMADE’s after-sales staff will help users solve problems in various ways at all times. We promise to provide lifetime technical support for all products sold by AMADE.

Why Do You Choose AMADE TECH as the Testing Equipment Supplier?2021-10-10T10:05:25+00:00

Competitive Prices

We are a professional Chinese manufacturer and supplier of testing equipment. As everyone knows, China is known as the world’s factory because it has the world’s most complete industrial categories, low labor costs and technological advantages. With a series of cost advantages and efficient management policies, our products have considerable price advantages among similar products. If you buy the same instrument in your home country, it may cost several times more.

Our low prices are not at the expense of quality, as we have skilled workers, excellent technicians and management personnel. High-quality materials are used in the manufacture of the machine. The core components of many products are from top international brands. Strict quality control ensures that products meet customer expectations.

competitive price from amade tech
testing objects of AMADE TECH

Abundant Products

Our testing equipment covers different industries. Each industry includes a variety of equipment to meet different testing needs. Sometimes, you may not just look for one device. It may take a lot of time and energy to find different instruments in different places.

Here at AMADE TECH, you can complete your purchase requirements in one stop. In addition to supplying our machines, we have a dedicated purchasing team to help you source any other equipment made in China at reasonable prices. Purchasing here will be an awesome and cost-saving experience for you.

Thoughtful Service

From pre-sales to after-sales, we have dedicated sales and technical personnel at your side at any time to answer various questions for you and respond to your various needs.

When you receive our product, a detailed operation manual will be attached to guide you to operate this machine. The technical team is available to assist you for any requirements. We provide 12 – 18 months of warranty and lifetime technical support for instruments. At any time, we are able to offer help on the operation, use and maintenance in various forms. Within the warranty period of the instrument, if non-human reasons cause any quality problem, we will solve it for you free of charge. Choosing AMADE TECH means choosing to be at ease.

Amade tech customer service
When I Receive This Tester from Amade-tech, How Do I Install and Use It?2021-10-09T09:11:07+00:00

It is ready to use when you receive the goods. This machine will be installed, debugged and calibrated well before it leaves our factory. When you first use our machine, you can easily complete the testing by referring to our user manual.

What’s Your After-sales Policy?2021-10-10T10:07:24+00:00

The moment you receive the machine, our after-sales staff will be there for you at any time. In addition to providing detailed operation manuals to guide you on how to use the machine for the first time, if necessary, we will also provide immediate support and help in the form of videos. If you encounter any problems during the use of the instrument, please get in touch with us immediately. We will respond within 2 – 4 hours and send the solution to you within one working day.

We provide 18 months of quality assurance and lifetime technical support. During the warranty period, if there is any quality problem caused by non-human reasons, AMADE TECH will solve it for you free of charge.

Others Also Viewed

Send an Inquiry

Please feel free to contact us for more details on the product, price, lead time, payment terms, shipment methods, etc. Amadetech sales specialists will respond within one working day.

Related Products

Go to Top