
Economical IEC 60529 IPX1/2 Rain Drip Tray Supplier
This Drip box is designed and manufactured strictly in accordance with the IEC60529 standard, specifically for water ingress protection IPX1 and IPX2 testing. The entire box is made of 304 stainless steel to ensure long-term use without rusting. The drip box is a cubic structure with a square bottom and a hollow interior for storing test water. The bottom of the Drip box is covered with drip holes spaced 20mm apart horizontally and vertically, each with a fitting. A dedicated IPX1/2 testing needle needs to be installed on each fitting, allowing water from the inner cavity to drip down from the needle with an inner diameter of 0.4mm during testing.
In order to prevent operators from accidentally touching the needle and causing personal injury, we have added a detachable protective net cover to the bottom of the drip plate to physically isolate the needles from the outside world, while also ensuring that the needle will not be bent by other things.
The top middle of the Drip box is designed with an inlet and inlet pipe for continuous water supply during testing. On the inlet pipe, there is also a branch that can be connected to an 8 mm compressed air pipe. The purpose is to quickly empty the remaining water in the drip box with compressed air after the test is completed, reducing the possibility of scale formation and needle blockage. The water inlet and air inlet are controlled separately by two independent valves. The water inlet can be connected to a regular tap water pipe. To facilitate monitoring and control of water flow during testing, we have equipped a manual flow meter with the equipment.

Drip needles
In order to facilitate users in fixing and hanging the drip box before testing, we have welded iron rings and equipped them with 4 iron chains at the four corners of its upper surface. You can choose to fix the four iron chains separately at four anchor points or merge the four iron chains into one and fix it at another anchor point based on the hardware conditions of the laboratory.
The drip area size of our drip tank can be customized according to your needs. The size and area mainly depend on the size of your sample enclosure. According to the requirements of relevant standards, the drip area must be greater than the sample enclosure, otherwise the sample cannot be completely covered by rainwater during testing.
In addition to the drip box, we can also provide a separate turntable. The sample is fixed on the turntable during testing, and the turntable can achieve forward or reverse rotation at the standard required speed of 1 RPM.
If your sample needs to be tested with electricity, we can install a waterproof socket at the bottom of the turntable to supply power to the sample. The load-bearing capacity of a typical turntable is within 50kg, and we can also accept customization for turntables with larger load-bearing capacities.
If you want a complete IPX1&IPX2 water drip test equipment, please click HERE.

Turntable
Test Standards
IEC60529, ISO 20653, DIN 40050-9, etc.
Technical Parameters
| Model | AT-C1005A0 |
| Material | 304 stainless steel |
| Dripping area | W 600 mm x D 600 mm (Customizable) |
| Needle spacing | 20 mm |
| Needle inner diameter | 0.4 mm |
| IPX1 water flow rate | 1+0.5 mm/min |
| IPX2 water flow rate | 3+0.5 mm/min |
Features
- The equipment is made of 304 stainless steel.
- The size of the drip tray can be customized.
- The needle and drip tray are independent structures that allow for easy replacement of the needle.
- Equipped with protective plates to protect operators.
- Equipped with iron chains to suspend the drip box.
- Equipped with an independent flow meter.
- Can be connected to compressed air.
- Cost-saving and easy to use.
- The turntable can be supplied separately.
Request a Quote Now
Please feel free to contact us for more details on the product, price, lead time, payment terms, shipment methods, etc. AmadeTech sales engineers will respond within one working day.


